Duct Sleeve Low Profile - CE
The Low Profile Duct Sleeves maintain the integrity of fire rated walls penetrated by plastic ventilation ducts. The Low Profile sleeves have been independently fire tested to BS EN 1366-3 in a full scale partition system with Uncapped/Uncapped pipe/duct end configuration as required for ventilation systems and assessed for use in series around multiple duct penetrations.
In the event of a fire the intumescent material of the duct sleeve expands and crushes the plastic ventilation duct, closing off this route to the fire for up to 120 minutes. Fire test evidence is available for use with up to 120 minutes wall constructions including a variety of single and double layer plasterboard partitions. Low profile duct sleeves need no additional metal cage or sleeving, can be slit for retro fitting over ductwork and access is only required from one side. The slim dimensions (typically 10-15mm thickness) and compressible nature of the intumescent material allows tight fitting against the ceiling soffit without the need to remove the top edge. The duct sleeves are available to fit common sizes of rectangular and circular plastic ventilation ducts.